Rohde & Schwarz SMAB-K24 - Page 192

List and Sweep Mode
R&S
®
SMA100B
190User Manual 1178.3834.02 ─ 05
All columns in a row must contain values. Cells with missing values are therefore filled
automatically, using the value of the previous row.
If you use global dwell time in list mode, consider also that the instrument uses the
value set with Global Dwell Time for all list steps and not the values from the list.
Since the table and navigation functions can be assumed to be known, the following
description contains a brief overview, shown by the example of the "List Data Editor". If
a function relates to a particular dialog, it is explicitly stated.
Settings
Edit List Mode Data.....................................................................................................190
Data handling keys .....................................................................................................190
└ Go To............................................................................................................ 190
└ Edit................................................................................................................191
└ Fill with Sensor..............................................................................................191
└ Save As/Save............................................................................................... 191
Fill... ............................................................................................................................191
Edit List Mode Data
Table with values for list or user correction processing.
Note: Once you enter a value, the editor automatically adds preset values in the other
columns. This functionality protects against data loss, otherwise incomplete rows will
be lost when saving. You can simply override these values.
"Frequency /Hz"
Sets the frequency values.
Remote command:
[:SOURce<hw>]:LIST:FREQuency on page 616
[:SOURce<hw>]:CORRection:CSET:DATA:FREQuency on page 585
"Power /dBm"
Sets the level values.
Remote command:
[:SOURce<hw>]:LIST:POWer on page 618
[:SOURce<hw>]:CORRection:CSET:DATA:POWer on page 585
"Dwell /s"
In list mode, sets the dwell time values.
Remote command:
[:SOURce<hw>]:LIST:DWELl:LIST on page 616
Data handling keys
Standard functions for file and data handling.
Go To ← Data handling keys
Selects a row for editing.
List Editor