Rohde & Schwarz SMAB-K24 - Page 436

Remote Control Commands
R&S
®
SMA100B
434User Manual 1178.3834.02 ─ 05
Parameters:
<State> 0 | 1 | OFF | ON
*RST: n.a. (factory preset: 0)
Example: See Example "Activating screen saver mode and display
update" on page 432
Manual operation: See "Screen Saver" on page 319
:DISPlay:BRIGhtness <BRIGhtness>
Sets the brightness of the dispaly.
Parameters:
<BRIGhtness> float
Range: 1.0 to 20.0
Increment: 1.0
*RST: 14.0
Example:
DISPlay:BRIGhtness 14
Manual operation: See "Display" on page 319
:DISPlay:BUTTon:BRIGhtness <ButtonBrightnes>
Sets the brightness of the [RF on/off] key.
Parameters:
<ButtonBrightnes> integer
Range: 1 to 20
*RST: n.a. (no preset. default: 14)
Example:
DISPlay:BUTTon:BRIGhtness 15
Manual operation: See "RF Hardkey" on page 319
:DISPlay:UPDate <Update>
Activates the refresh mode of the display.
Parameters:
<Update> 0 | 1 | OFF | ON
*RST: n.a. (factory preset: 1)
Example: See Example "Activating screen saver mode and display
update" on page 432
Manual operation: See "Display Update is" on page 320
:DISPlay:ANNotation:AMPLitude <State>
Indicates asterisks instead of the level values in the status bar.
DISPlay Subsystem