Rohde & Schwarz SMAB-K24 - Page 548

Remote Control Commands
R&S
®
SMA100B
546User Manual 1178.3834.02 ─ 05
<subsystem>:PRESet
[:SOURce<hw>]:ADF:PRESet
[:SOURce<hw>]:ILS:PRESet
[:SOURce<hw>]:VOR:PRESet
Sets the parameters of the digital standard to their default values (*RST values speci-
fied for the commands).
Not affected is the state set with the command SOURce<hw>:VOR:STATe.
Example: See Example "Save/Recall a configuration" on page 541.
<subsystem>:SETTing:CATalog
[:SOURce<hw>]:ADF:SETTing:CATalog
[:SOURce<hw>]:ILS:SETTing:CATalog?
[:SOURce<hw>]:VOR:SETTing:CATalog?
Queries the files with settings in the default directory. Listed are files with the file exten-
sion *.adf/*.ils/*.vor.
Return values:
<FileNames> <filename1>,<filename2>,...
Returns a string of filenames separated by commas.
Example: See Example "Save/Recall a configuration" on page 541.
Usage: Query only
<subsystem>:SETTing:DELete
[:SOURce<hw>]:ADF:SETTing:DELete <Filename>
[:SOURce<hw>]:ILS:SETTing:DELete <Filename>
[:SOURce<hw>]:VOR:SETTing:DELete <Filename>
Deletes the selected file from the default or the specified directory. Deleted are files
with extension *.adf/*.ils/*.vor.
Setting parameters:
<Filename> "<filename>"
Filename or complete file path; file extension can be omitted
Example: See Example "Save/Recall a configuration" on page 541.
Usage: Setting only
<subsystem>:SETTing:LOAD
[:SOURce<hw>]:ADF:SETTing:LOAD <Filename>
[:SOURce<hw>]:ILS:SETTing:LOAD <Filename>
[:SOURce<hw>]:VOR:SETTing:LOAD <Filename>
Loads the selected file from the default or the specified directory. Loaded are files with
extension *.adf/*.ils/*.vor.
SOURce Subsystem