Rohde & Schwarz SMB 100a

To Next Page

To Previous Page

R&S SMB Command Description

1407.0806.32 6.31 E-2

[SOURce:]CORRection:DEXChange:MODE IMPort | EXPort

The command selects if user correction lists should be imported or exported. Depending on the

selection her, the file select command define either the source or the destination for user correction

lists and ASCII files.

Example:

CORR:DEXC:MODE IMP

'selects that ASCII files with frequency and level value pairs are imported and

transferred into user correction lists.

CORR:DEXC:AFIL:SEL '‘var/rs_gen/ucor/import/ucor.csv'

'selects that ASCII file ucor.csv is imported.

CORR:DEXC:SEL '‘var/rs_gen/ucor/import/ucor_imp'

'selects that the ASCII file ucor.csv is imported into user correction list

ucor_imp.

*RST value Resolution Options SCPI

- - Device-specific

[SOURce:]CORRection:DEXChange:SELect <list_name>

The command selects the user correction list to be imported or exported. .

The user correction files are stored with the fixed file extensions *.uco in a directory of the user's

choice. The directory applicable to the commands is defined with the command MMEMory:CDIR. A

path can also be specified in command SOUR:CORR:DEXC:SEL, in which case the files are stored

or loaded in the specified directory.