R&S SMB Command Description
1407.0806.32 6.53 E-2
[SOURce:]LIST:DEXChange:AFILe:SELect <ascii_file_name>
The command selects the ASCII file to be imported or exported.
The ASCII files are stored with the fixed file extensions *.txt or *.csv in a directory of the user's
choice. The directory applicable to the commands is defined with the command MMEMory:CDIR. A
path can also be specified in command SOUR:LIST:DEXC:AFIL:SEL, in which case the files are
stored or loaded in the specified directory.
Example:
LIST:DEXC:MODE IMP
'selects that ASCII files with frequency and level value pairs are imported and
transferred into list mode lists.
LIST:DEXC:AFIL:SEL '‘var/rs_gen/listmode/import/list.csv'
'selects that ASCII file list.csv is imported.
LIST:DEXC:SEL '‘var/rs_gen/listmode/import/list_imp'
'selects that the ASCII file list.csv is imported into list mode list list_imp.
*RST value Resolution Options SCPI
- - Device-specific
[SOURce:]LIST:DEXChange:AFILe:SEParator:COLumn TABulator | SEMicolon | COMMa | SPACe
The command selects the separator between the frequency and level column of the ASCII table.
Example:
LIST:DEXC:MODE EXP
'selects that the list mode list is exported into an ASCII file.
LIST:DEXC:AFIL:SEL '‘var/rs_gen/listmode/import/list.csv'
'selects ASCII file list.csv as destination for the list mode list data.
LIST:DEXC:AFIL:SEP:COL TAB
'the pairs of frequency and level values are separated by a tabulator.
LIST:DEXC:AFIL:SEP:DEC DOT
'selects the decimal separator dot.
LIST:DEXC:SEL '‘var/rs_gen/listmode/import/list_imp'
'selects that the list mode list list_imp is imported into ASCII file list.csv .
*RST value Resolution Options SCPI
SEMicolon - Device-specific
To Next Page
Loading...
