Command Description R&S SMB
1407.0806.32 6.54 E-2
[SOURce:]LIST:DEXChange:AFILe:SEParator:DECimal DOT | COMMa
The command the decimal separator used in the ASCII data between '.' (decimal point) and ','
(comma) with floating-point numerals.
Example:
LIST:DEXC:MODE EXP
'selects that the list mode list is exported into an ASCII file.
LIST:DEXC:AFIL:SEL '‘var/rs_gen/listmode/import/list.csv'
'selects ASCII file list.csv as destination for the list mode list data.
LIST:DEXC:AFIL:SEP:COL TAB
'the pairs of frequency and level values are separated by a tabulator.
LIST:DEXC:AFIL:SEP:DEC DOT
'selects the decimal separator dot.
LIST:DEXC:SEL '‘var/rs_gen/listmode/import/list_imp'
'selects that the list mode list list_imp is imported into ASCII file list.csv .
*RST value Resolution Options SCPI
DOT - Device-specific
[SOURce:]LIST:DEXChange:EXECute
The command starts the export or import of the selected file. When import is selected, the ASCII file
is imported as list mode list. When export is selected, the list mode list is exported into the selected
ASCII file.
The command triggers an event and therefore has no *RST value.
Example:
LIST:DEXC:MODE IMP
'selects that ASCII files with frequency and level value pairs are imported and
transferred into list mode lists.
LIST:DEXC:AFIL:SEL '‘var/rs_gen/listmode/import/list.csv'
'selects that ASCII file list.csv is imported.
LIST:DEXC:SEL '‘var/rs_gen/listmode/import/list_imp'
'selects that the ASCII file list.csv is imported into list mode list list_imp.
LIST:DEXC:EXEC
'starts the import of the ASCII file data into the list mode file.
*RST value Resolution Options SCPI
- - Device-specific
To Next Page
Loading...
