R&S SMB Command Description
1407.0806.32 6.93 E-2
SYSTem:COMMunicate:NETWork[:IPADdress]:SUBNet:MASK 0.0.0.0 .. ff.ff.ff.ff
The command enters the Subnet mask. The entry is only activated after sending command
SYST:COMM:NETW:IPAD:SET.
Example:
SYST:COMM:NETW:SUBN:MASK 255.255.255.0
'enters the Subnet mask.
SYST:COMM:NETW:IPAD:SET
'activates all changes of the IP address settings.
*RST value Resolution Options SCPI
- Device-specific
SYSTem:COMMunicate:MACaddress?
The command queries the MAC address of the network adapter.
The command is a query command and therefore has no *RST value.
Example:
SYST:COMM:NETW:MAC?
'queries the MAC address.
*RST value Resolution Options SCPI
- Device-specific
SYSTem:COMMunicate:NETWork:RESource?
The command queries the visa resource string. This string is used for remote control of the
instrument.
The command is a query command and therefore has no *RST value.
Example:
SYST:COMM:NETW:RES?
'queries the VISA resource string.
Response:
TCPIP::192.1.2.3::INSTR
*RST value Resolution Options SCPI
- Device-specific
SYSTem:COMMunicate:USB:RESource?
The command queries the visa resource string for remote control via the USB interface. .
The command is a query command and therefore has no *RST value.
Example:
SYST:COMM:USB:RES?
'queries the VISA resource string for remote control via the USB interface.
Response:
USB::72::000000::INSTR
*RST value Resolution Options SCPI
- Device-specific
To Next Page
Loading...
