Rohde & Schwarz SMB100A - Source1:List:trigger:execute; [: S Ource<Hw>]: L IST: C Atalog

Remote Control Commands
R&S
®
SMB100A
321Operating Manual 1407.0806.32 ─ 13
8. Trigger the list (depending on the mode).
SOURce1:LIST:TRIGger:EXECute
9. Deactivate the List mode.
SOURce1:FREQuency:MODE CW
SCPI refers to the individual lists as segments.
[:SOURce<hw>]:LIST:CATalog?......................................................................................321
[:SOURce<hw>]:LIST:DELete.........................................................................................322
[:SOURce<hw>]:LIST:DELete:ALL...................................................................................322
[:SOURce<hw>]:LIST:DEXChange:AFILe:CATalog?.........................................................323
[:SOURce<hw>]:LIST:DEXChange:AFILe:EXTension........................................................323
[:SOURce<hw>]:LIST:DEXChange:AFILe:SELect.............................................................324
[:SOURce<hw>]:LIST:DEXChange:AFILe:SEParator:COLumn...........................................324
[:SOURce<hw>]:LIST:DEXChange:AFILe:SEParator:DECimal...........................................325
[:SOURce<hw>]:LIST:DEXChange:EXECute....................................................................325
[:SOURce<hw>]:LIST:DEXChange:MODE........................................................................326
[:SOURce<hw>]:LIST:DEXChange:SELect.......................................................................326
[:SOURce<hw>]:LIST:DWELl..........................................................................................327
[:SOURce<hw>]:LIST:FREE?..........................................................................................327
[:SOURce<hw>]:LIST:FREQuency...................................................................................327
[:SOURce<hw>]:LIST:FREQuency:POINts?.....................................................................328
[:SOURce<hw>]:LIST:INDex...........................................................................................328
[:SOURce<hw>]:LIST:INDex:STARt.................................................................................329
[:SOURce<hw>]:LIST:INDex:STOP.................................................................................329
[:SOURce<hw>]:LIST:LEARn..........................................................................................330
[:SOURce<hw>]:LIST:MODE..........................................................................................330
[:SOURce<hw>]:LIST:POWer..........................................................................................331
[:SOURce<hw>]:LIST:POWer:POINts?............................................................................331
[:SOURce<hw>]:LIST:RESet...........................................................................................331
[:SOURce<hw>]:LIST:RUNNing?.....................................................................................332
[:SOURce<hw>]:LIST:SELect..........................................................................................332
[:SOURce<hw>]:LIST:TRIGger:EXECute..........................................................................332
[:SOURce<hw>]:LIST:TRIGger:SOURce..........................................................................332
[:SOURce<hw>]:LIST:CATalog?
The command requests a list of available lists. The individual lists are separated by com-
mas.
The lists are stored with the fixed file extensions *.lsw in a directory of the user's choice.
The directory applicable to the commands is defined with the command
MMEMory:CDIR.
Return values:
<Catalog> string
SOURce Subsystem