Rohde & Schwarz SMBV100A - Protection

Instrument Function
R&S
®
SMBV100A
146Operating Manual 1176.8016.02 ─ 17
Set to default
Enables you to reset the *IDN and *OPT strings in user defined mode, see "Mode"
on page 145 .
The default strings vary depending on the selected emulation mode (Language)
Remote command:
:SYSTem:IDENtification:PRESet on page 834
IDN String
Indicates the identification string of the instrument when queried with the common
command *IDN?.
To assign a user defined identification string, select Mode "User defined".
Remote command:
*IDN? on page 506
:SYSTem:IRESponse on page 834 (user defined mode)
OPT String
Indicates the option string of the instrument as queried with the common command
*OPT?.
In "User defined" (see Mode) IDN String, you can create a user defined option string in
addition to the automatically created one.
Remote command:
*OPT? on page 506
:SYSTem:ORESponse on page 835
5.2.3.17 Protection
This "Protection" dialog provides access to the unlocking of different protection levels .
Access:
► Select "Setup > Protection"
After power on the instrument, all protection levels are locked. To unlock the protec-
tion, the correct password must be entered, see "To unlock or lock a protection level..."
on page 147.
The following functions are protected in the respective levels:
●
Protection Level 1
General Instrument Settings