Instrument Function
R&S
®
SMBV100A
178Operating Manual 1176.8016.02 ─ 17
Remote command:
n.a.
Show ref
Displays the reference curve(s). All defined reference curves are displayed simultane-
ously (see the description of the "Copy to ref" button).
The reference curves are displayed together with the current signal. They allow visual
comparison of two or more signals with different settings, e.g. with different filters.
Clicking the button again hides the reference curves.
The reference curves must be defined beforehand using the "Copy to Ref" button.
Remote command:
n.a.
Copy to ref
Defines the current curve as the reference curve.
A window opens in which the curve can be given a comment and a color.
First of all the desired color is highlighted in the top window. If this color has already
been assigned to a reference curve, this curve is overwritten. The command is entered
in the bottom "Comment" section. This comment then appears next to the highlighted
color.
Up to 5 reference curves can be defined and displayed simultaneously in different col-
ors together with the current signal.
Graphical Display - Graphics
To Next Page
Loading...
