Rohde & Schwarz SMBV100A - Page 699

Remote Control Commands
R&S
®
SMBV100A
684Operating Manual 1176.8016.02 ─ 17
Usage: Query only
Manual operation: See "Save/Recall" on page 353
[:SOURce<hw>]:BB:DM:SETTing:DELete <Filename>
This command deletes the selected file with Custom Digital Modulation settings. The
directory is set using command MMEM:CDIRectory. A path can also be specified, in
which case the files in the specified directory are read. The file extension may be omit-
ted. Only files with the file extension *.dm will be deleted.
Setting parameters:
<Filename> string
Example:
BB:DM:STAN:ULIS:DEL 'DM_1'
deletes file DM_1.
Usage: Setting only
Manual operation: See "Save/Recall" on page 353
[:SOURce<hw>]:BB:DM:SETTing:LOAD <Filename>
This command loads the selected file with Custom Digital Modulation settings. The
directory is set using command MMEM:CDIRectory. A path can also be specified, in
which case the files in the specified directory are read. The file extension may be omit-
ted. Only files with the file extension *.dm will be loaded.
Setting parameters:
<Filename> string
Example:
BB:DM:STAN:ULIS:LOAD 'DM_1'
loads file DM_1.
Usage: Setting only
Manual operation: See "Save/Recall" on page 353
[:SOURce<hw>]:BB:DM:SETTing:STORe <Filename>
This command stores the current Custom Digital Modulation settings into the selected
file. The directory is set using command MMEM:CDIRectory. A path can also be
specified, in which case the files in the specified directory are read. Only the file name
has to be entered. User Standards are stored as files with the specific file extensions
*.dm.
Setting parameters:
<Filename> string
Example:
BB:DM:STAN:ULIS:STOR 'DM_QAM'
stores the current Custom Digital Modulation settings into file
DM_QAM.
Usage: Setting only
SOURce Subsystem