Rohde & Schwarz SMBV100B - Page 116

Configuring the Internal Baseband Source
R&S
®
SMBV100B
114User Manual 1178.4460.02 ─ 03
Settings:
Marker Mode............................................................................................................... 114
Marker x Delay............................................................................................................ 114
Marker Mode
Basic marker configuration for up to three marker channels. The contents of the dialog
change with the selected marker mode.
Use the settings to define the shape and periodicity of the markers. See Chap-
ter 3.4.1.2, "Regular Marker Output Signals", on page 94 for description of the regular
marker signals.
The instrument routes the generated marker signals to the selected output connectors.
See Chapter 10.2, "Configuring the Global Connectors", on page 515.
"CList"
A marker signal as defined in the selected control list.
Remote command:
[:SOURce<hw>]:BB:DM:TRIGger:OUTPut<ch>:MODE on page 728
[:SOURce<hw>]:BB:DM:TRIGger:OUTPut<ch>:PULSe:DIVider on page 729
[:SOURce<hw>]:BB:DM:TRIGger:OUTPut<ch>:PULSe:FREQuency?
on page 730
[:SOURce<hw>]:BB:DM:TRIGger:OUTPut<ch>:PATTern on page 729
[:SOURce<hw>]:BB:DM:TRIGger:OUTPut<ch>:OFFTime on page 729
[:SOURce<hw>]:BB:DM:TRIGger:OUTPut<ch>:ONTime on page 729
ARB: see "Marker Mode" on page 159
[:SOURce<hw>]:BB:MCCW:TRIGger:OUTPut<ch>:MODE on page 793
[:SOURce<hw>]:BB:MCCW:TRIGger:OUTPut<ch>:PULSe:DIVider on page 794
[:SOURce<hw>]:BB:MCCW:TRIGger:OUTPut<ch>:PULSe:FREQuency?
on page 794
[:SOURce<hw>]:BB:MCCW:TRIGger:OUTPut<ch>:PATTern on page 794
[:SOURce<hw>]:BB:MCCW:TRIGger:OUTPut<ch>:ONTime on page 793
[:SOURce<hw>]:BB:MCCW:TRIGger:OUTPut<ch>:OFFTime on page 793
Marker x Delay
Delays the marker signal at the marker output relative to the signal generation start.
Variation of the parameter "Marker x Delay" causes signal recalculation.
Common Functions and Settings in the Baseband Domain