Configuring the RF Signal
R&S
®
SMBV100B
342User Manual 1178.4460.02 ─ 03
Access to "Edit List Mode Data":
► "RF" > "Sweep/List" > "List Mode" > "List Mode Data" > "Edit List Mode Data"
The editor for list mode data provides a table with RF frequency and power values
and standard navigation functions.
Access to "Edit User Correction Data":
► "RF" > "RF Level" > "User Correction" > "Edit User Cor. Data"
The editor for user correction provides a table with RF frequency and power val-
ues, an extra column for defining variable dwell times, and standard navigation
functions.
Varying the RF Signal in List or Sweep Mode
To Next Page
Loading...
