Rohde & Schwarz SMBV100B - Page 507

File and Data Management
R&S
®
SMBV100B
505User Manual 1178.4460.02 ─ 03
If you have enabled "Automatic Naming", the instrument displays the automatically
generated filename.
Remote command:
:HCOPy:FILE[:NAME] on page 643
Format
Selects the output file format, for example *.bmp, *.jpg*.xpm and *.png.
Remote command:
:HCOPy:IMAGe:FORMat on page 642
:HCOPy:DEVice:LANGuage on page 642
Options...
Accesses Hardcopy Options dialog.
Save
Saves a hardcopy of the current display as a file.
Remote command:
:HCOPy[:EXECute] on page 643
Hardcopy Options > Common
Access: select "Hardcopy > Options... > Common".
With the provided settings, you can customize the file format and the syntax of the
automatically assigned filename.
Automatic Naming ← Hardcopy Options > Common
If enabled, creates the output filenames automatically according to the rules set with
the Hardcopy Options > Automatic Naming settings.
Remote command:
:HCOPy:FILE[:NAME]:AUTO:STATe on page 645
Format ← Hardcopy Options > Common
Selects the output file format, for example *.bmp, *.jpg*.xpm and *.png.
Remote command:
:HCOPy:IMAGe:FORMat on page 642
:HCOPy:DEVice:LANGuage on page 642
Region ← Hardcopy Options > Common
Displays the snapshot area.
Creating Screenshots of Current Settings