Network Operation and Remote Control
R&S
®
SMBV100B
597User Manual 1178.4460.02 ─ 03
The instrument opens the standard file select dialog, see Chapter 9.4.1, "Save/
Recall Settings", on page 481.
2. In the "Format" entry field, select the source code.
3. Depending on the selected format, convert the script as described in Chap-
ter 11.15, "How to Convert and Save SCPI Lists", on page 598
4. Enter a filename.
5. Select "Export".
The instrument writes all SCPI commands of the key parameters and the modified
settings in the file. Also assigns the file extension automatically according to the
source code format.
6. To preview the content of the SCPI list:
a) Select "Save/Rcl".
b) Select "Operation Mode > SCPI-Export".
c) In the /var/user/ directory, select a previously saved file.
d) Select "Show SCPI List".
The list of all SCPI commands is displayed, for example, for a final check.
Exporting the SCPI list of the instrument state in one step is a fast and convenient
method. Nevertheless, it usually requires postprocessing on an external PC.
How to Record / Create SCPI Lists
To Next Page
Loading...
