Getting Started
R&S
®
SMBV100B
62User Manual 1178.4460.02 ─ 03
The R&S SMBV100B provides a build-in function to represent the generated signal on
a graphical signal display. We demonstrate this feature by showing the characteristics
at one particular point of the signal processing chain. You can, however, display the
signal characteristics at other different stages.
This example shows you how to use this graphical display to verify the generated sig-
nal. Use the signal generated in Chapter 2.3.4, "Enabling and Configuring a Marker
Signal", on page 60.
To access the graphical signal display functionality
► Perform one of the following:
a) Select "Taskbar > System Configuration > Graphics"
b) On the "Taskbar", tap the wave icon.
The "Graphics Configuration" dialog opens.
To visualize the signal
1. In the "Graphics Configuration" dialog, select "Mode > Constellation".
2. Select "Source > Baseband".
3. Select "Add" to enable signal display.
Trying Out the Instrument
To Next Page
Loading...
