Getting Started
R&S
®
SMBV100B
66User Manual 1178.4460.02 ─ 03
4. Tap the "Recall" button.
All instrument settings are restored and the display resembles the instrument dis-
play right before the settings were saved.
How to display all parameters with values different to their preset values
When you load a file to your instrument and do not have enough information on the
changed settings, visualize all parameters that have been changed from their default
state.
Try out the following:
●
Tap and hold on an empty space in the block diagram to access the context-sensi-
tive menu.
●
Select "Mark All Parameters Changed from Preset".
●
All changed parameters are highlighted.
See also Chapter 9, "File and Data Management", on page 471.
Trying Out the Instrument
To Next Page
Loading...
