Remote Control Commands
R&S
®
SMBV100B
901User Manual 1178.4460.02 ─ 03
Example: See Example "Retrieving information on network-related set-
tings" on page 889.
Manual operation: See "Hostname" on page 563
:SYSTem:COMMunicate:NETWork[:COMMon]:WORKgroup <Workgroup>
Sets an individual workgroup name for the instrument.
Parameters:
<Workgroup> string
Example: See Example "Retrieving information on network-related set-
tings" on page 889.
Manual operation: See "Workgroup" on page 563
:SYSTem:COMMunicate:NETWork[:IPADdress]:DNS <DNS>
Determines or queries the network DNS server to resolve the name.
Parameters:
<DNS> string
Example: See Example "Retrieving information on network-related set-
tings" on page 889.
Manual operation: See "DNS Server" on page 564
:SYSTem:COMMunicate:NETWork[:IPADdress]:GATeway <Gateway>
Sets the IP address of the default gateway.
Parameters:
<Gateway> string
Range: 0.0.0.0 to ff.ff.ff.ff
Example: See Example "Retrieving information on network-related set-
tings" on page 889.
Manual operation: See "Default Gateway" on page 564
:SYSTem:COMMunicate:NETWork[:IPADdress]:SUBNet:MASK <Mask>
Sets the subnet mask.
Parameters:
<Mask> string
Example: See Example "Retrieving information on network-related set-
tings" on page 889.
Manual operation: See "Subnet Mask" on page 564
SYSTem Subsystem
To Next Page
Loading...
