User Correction R&S SMC100A
1411.4060.32 4.64 E-1
Mode - User
Correction
Selects if user correction lists should be imported or exported. The
settings offered depend on the selected mode.
Remote-control command:
S
OUR:CORR:DEXC:MODE IMP
Extension - User
Correction
Selects the file extension of the ASCII file to be imported or exported.
Selection TXT (text file) or CSV (Excel file) is available.
Remote-control command:
SOUR:CORR:DEXC:AFIL:EXT TXT
Decimal Point - User
Correction
Selects the decimal separator used in the ASCII data between '.'
(decimal point) and ',' (comma) with floating-point numerals.
Remote-control command:
SOUR:CORR:DEXC:AFIL:SEP:DEC DOT
Column Separator-
User Correction
Selects the separator between the frequency and level column of the
ASCII table the user correction list is exported to or imported from.
Remote-control command:
SOUR:CORR:DEXC:AFIL:SEP:COL TAB
Select ASCII Source /
Destination - User
Correction
Calls the File Manager for selecting the ASCII file to be imported into
a user correction list (source) or the ASCII file the user correction list
is exported (destination) in.
Remote-control command:
SOUR:CORR:DEXC:AFIL:SEL "d:/user/ucor/list1.txt"
Destination / Source -
User Correction
Calls the File Manager for selecting the user correction list to be
exported (source) into an ASCII file or the destination for the ASCII file
to be imported (destination) in.
Remote-control command:
SOUR:CORR:DEXC:SEL "d:/user/ucor/list1.txt"
Import / Export - User
Correction
Starts the export or import of the selected file.
When import is selected, the ASCII file is imported as user correction
list.
When export is selected, the user correction list is exported into the
selected ASCII file.
Remote-control command:
SOUR:CORR:DEXC:EXEC
To Next Page
Loading...
