Command Description R&S SMC100A
1411.4060.32 6.38 E-1
[SOURce:]CORRection:DEXChange:AFILe:SEParator:COLumn TABulator | SEMicolon | COMMa |
SPACe
The command selects the separator between the frequency and level column of the ASCII table.
Example:
CORR:DEXC:MODE EXP
'selects that the user correction list is exported into an ASCII file.
CORR:DEXC:AFIL:SEL '‘var/rs_gen/ucor/import/ucor.csv'
'selects ASCII file ucor.csv as destination for the user correction list data.
CORR:DEXC:AFIL:SEP:COL TAB
'the pairs of frequency and level values are separated by a tabulator.
CORR:DEXC:AFIL:SEP:DEC DOT
'selects the decimal separator dot.
CORR:DEXC:SEL '‘var/rs_gen/ucor/import/ucor_imp'
'selects that the user correction list ucor_imp is imported into ASCII file
ucor.csv .
*RST value Resolution Options SCPI
SEMicolon - Device-specific
[SOURce:]CORRection:DEXChange:AFILe:SEParator:DECimal DOT | COMMa
The command the decimal separator used in the ASCII data between '.' (decimal point) and ','
(comma) with floating-point numerals.
Example:
CORR:DEXC:MODE EXP
'selects that the user correction list is exported into an ASCII file.
CORR:DEXC:AFIL:SEL '‘var/rs_gen/ucor/import/ucor.csv'
'selects ASCII file ucor.csv as destination for the user correction list data.
CORR:DEXC:AFIL:SEP:COL TAB
'the pairs of frequency and level values are separated by a tabulator.
CORR:DEXC:AFIL:SEP:DEC DOT
'selects the decimal separator dot.
CORR:DEXC:SEL '‘var/rs_gen/ucor/import/ucor_imp'
'selects that the user correction list ucor_imp is imported into ASCII file
ucor.csv .
*RST value Resolution Options SCPI
DOT - Device-specific
To Next Page
Loading...
