R&S SMC100A Command Description
1411.4060.32 6.39 E-1
[SOURce:]CORRection:DEXChange:EXECute
The command starts the export or import of the selected file. When import is selected, the ASCII file
is imported as user correction list. When export is selected, the user correction list is exported into
the selected ASCII file.
The command triggers an event and therefore has no *RST value.
Example:
CORR:DEXC:MODE IMP
'selects that ASCII files with frequency and level value pairs are imported and
transferred into user correction lists.
CORR:DEXC:AFIL:SEL '‘var/rs_gen/ucor/import/ucor.csv'
'selects that ASCII file ucor.csv is imported.
CORR:DEXC:SEL '‘var/rs_gen/ucor/import/ucor_imp'
'selects that the ASCII file ucor.csv is imported into user correction list
ucor_imp.
CORR:DEXC:EXEC
'starts the import of the ASCII file data into the user correction file.
*RST value Resolution Options SCPI
- - Device-specific
[SOURce:]CORRection:DEXChange:MODE IMPort | EXPort
The command selects if user correction lists should be imported or exported. Depending on the
selection her, the file select command define either the source or the destination for user correction
lists and ASCII files.
Example:
CORR:DEXC:MODE IMP
'selects that ASCII files with frequency and level value pairs are imported and
transferred into user correction lists.
CORR:DEXC:AFIL:SEL '‘var/rs_gen/ucor/import/ucor.csv'
'selects that ASCII file ucor.csv is imported.
CORR:DEXC:SEL '‘var/rs_gen/ucor/import/ucor_imp'
'selects that the ASCII file ucor.csv is imported into user correction list
ucor_imp.
*RST value Resolution Options SCPI
- - Device-specific
To Next Page
Loading...
