Command Description R&S SMC100A
1411.4060.32 6.40 E-1
[SOURce:]CORRection:DEXChange:SELect <list_name>
The command selects the user correction list to be imported or exported. .
The user correction files are stored with the fixed file extensions *.uco in a directory of the user's
choice. The directory applicable to the commands is defined with the command MMEMory:CDIR. A
path can also be specified in command SOUR:CORR:DEXC:SEL, in which case the files are stored
or loaded in the specified directory.
Example:
CORR:DEXC:MODE IMP
'selects that ASCII files with frequency and level value pairs are imported and
transferred into user correction lists.
CORR:DEXC:AFIL:SEL '‘var/rs_gen/ucor/import/ucor.csv'
'selects that ASCII file ucor.csv is imported.
CORR:DEXC:SEL '‘var/rs_gen/ucor/import/ucor_imp'
'selects that the ASCII file ucor.csv is imported into user correction list
ucor_imp.
*RST value Resolution Options SCPI
- - Device-specific
[SOURce:]CORRection:CSET[:SELect] <table name>
The command selects the table for user correction. Level correction must also be activated with the
command SOURce<[1]|2>:CORRection:CSET:STATe ON.
The lists are stored with the fixed file extensions *.uco in a directory of the user's choice. The
directory applicable to the commands is defined with the command MMEMory:CDIR. A path can
also be specified in command :SOUR:CORR:CSET:SEL, in which case the files in the specified
directory are selected.
The command is an event and therefore has no *RST value.
Example:
CORR:CSET ‘var/lists/ucor/ucor1'
'selects the table ucor1.
CORR ON
'activates level correction. Correction is performed using the table ucor1.
*RST value Resolution Options SCPI
- - Device-specific
To Next Page
Loading...
