Rohde & Schwarz SMC100A - Display;Keyboard Settings

Instrument Function
R&S
®
SMC100A
94Operating Manual 1411.4060.32 ─ 09
Note: Only the connection of the instrument to the network restarts, the network itself
is not affected.
Remote command:
:SYSTem:COMMunicate:NETWork:RESTart on page 354
5.2.3.11 Display/Keyboard Settings
In the "Display/Keyboard Settings" dialog the power-save mode and external keyboard
settings are made. It is opened using the SETUP or MENU key under "Environment".
Screen Saver Active
Activates/deactivates the screen-save mode of the display.
If activated, the display including backlight is completely switched off after the elapse of
the "Wait Time" when no entries via front panel, external mouse or external keyboard
are made.
This mode is recommended for preserving the display especially if the instrument is
exclusively operated via remote control.
Remote command:
:DISPlay:PSAVe[:STATe] on page 246
Wait Time
Enters the idle time that must elapse before the display lamp is shut off when no
entries are made.
Remote command:
:DISPlay:PSAVe:HOLDoff on page 245
Toggle Summary Screen
Activates/deactivates the magnified frequency and level indication. If activated, the fre-
quency and level indication covers the complete display.
Remote command:
n.a.
GUI Language
Selects the language of the graphical user interface.
Remote command:
n.a.
General Instrument Settings