Rohde & Schwarz SMC100A - Loading Instrument Settings

Instrument Function
R&S
®
SMC100A
113Operating Manual 1411.4060.32 ─ 09
The name of the dialog is context sensitive but the provided functions are self-explana-
tory and very similar.
With the provided settings, you can perform the following:
●
to navigate through the file system, use the directory tree
●
to load and store files, use the dedicated functions "Select", "Save" and Recent
files
●
to perform standard file management functions, like create new directories, move,
copy, delete files and/or directories, use the standard "File Manager" function (see
" File Manager" on page 113).
Remote command:
to list all files in a directory:
:MMEMory:CDIRectory on page 260
:MMEMory:CATalog? on page 259
[:SOURce]:CORRection:CSET:CATalog? on page 280
Save
Stores the current instrument settings under the specified path.
Remote command:
*SAV on page 237
:MMEMory:STORe:STATe on page 264
Save Immediate x
Stores the current instrument setting in one of the three intermediate memories.
These instrument settings are retained until a different instrument setting is stored in
the intermediate memory. When the instrument is switched off, the contents of the
intermediate memories are retained.
Remote command:
*SAV on page 237
File Manager
Accesses the "File Manager" dialog, see Chapter 5.2.8.4, "File Manager",
on page 115.
Remote command:
n.a.
5.2.8.3 Loading Instrument Settings
If "Recall" is selected under "Select Operation", the "File" menu provides options for
loading complete instrument settings. Here it is possible to select whether the current
or stored frequency and level settings are to be used.
General Instrument Settings