Instrument Function
R&S
®
SMC100A
189Operating Manual 1411.4060.32 ─ 09
Gate Input Polarity - Pulse Generator
(Trigger Mode External Gated only)
Selects the polarity of the Gate signal.
The signal is supplied via the PULSE EXT connector.
"Normal"
The pulse signal is generated while the gate signal is high.
"Inverse"
The pulse signal is generated while the gate signal is low.
Remote command:
[:SOURce<hw>]:PULM:TRIGger:EXTernal:GATE:POLarity on page 328
Modulation Generator and LF Output
To Next Page
Loading...
