Rohde & Schwarz SMC100A - Hcopy:file[:Name]:Auto:directory:clear; Hcopy:file[:Name]:Auto:file; Hcopy:file[:Name]:Auto[:File]:Day

Remote Control Commands
R&S
®
SMC100A
251Operating Manual 1411.4060.32 ─ 09
:HCOPy:FILE[:NAME]:AUTO:DIRectory:CLEar
Deletes all files with extensions "bmp", "img", "png" and "xpm" in the directory set for
automatic naming.
Example:
HCOP:FILE:AUTO:DIR:CLE
Deletes all image files with extensions "bmp", "img", "png" and
"xpm".
Usage: Event
Manual operation: See " File Options " on page 108
:HCOPy:FILE[:NAME]:AUTO:FILE?
Queries the filename that what generated using the automatic naming settings. By
default the automatically generated filename is composed of:
<Prefix><YYYY><MM><DD><Number>.<Format>.
Each component can be deactivated/activated separately.
Return values:
<File> string
Example:
HCOP:DEV:LANG BMP
Selects output format *.bmp.
HCOP:FILE:AUTO:DIR '/usb/'
Defines the destination directory '/usb/'
HCOP:FILE:AUTO:PREF 'gen'
The filename starts with the prefix 'gen'. The usage of auto-
matic naming with prefix and date in the filename is preset (…:
STAT ON).
HCOP
Triggers the generation of a hardcopy of the current trace.
HCOP:FILE:AUTO?
Queries the path including the filename
Response:
/usb/gen101012008001.bmp'
HCOP:FILE:AUTO:FILE?
Queries the filename
Response: 'gen101012008001.bmp'
Usage:
Query only
Manual operation: See "File Info" on page 108
:HCOPy:FILE[:NAME]:AUTO[:FILE]:DAY?
Queries the day of the current system date which is used in the filename if automatic
naming is activated.
HCOPy Subsystem