Rohde & Schwarz SMC100A - Hcopy:file[:Name]:Auto:state; Hcopy:file[:Name]:Auto[:File]:Year; Hcopy:image:format

Remote Control Commands
R&S
®
SMC100A
254Operating Manual 1411.4060.32 ─ 09
:HCOPy:FILE[:NAME]:AUTO[:FILE]:YEAR?
Queries the year in the date part in the automatic filename.
Return values:
<Year> integer
Range: 1784 to 8000
*RST: 0
Example:
HCOPy:FILE:AUTO:YEAR?
Queries the year in the date part in the automatic filename.
Usage: Query only
:HCOPy:FILE[:NAME]:AUTO[:FILE]:YEAR:STATe <State>
Activates the usage of the year in the automatic filename.
Parameters:
<State> 0 | 1 | OFF | ON
*RST: 1
Example:
HCOP:FILE:AUTO:YEAR:STAT OFF
Deactivates the usage of the year in the automatic filename.
Manual operation: See " File Options " on page 108
:HCOPy:FILE[:NAME]:AUTO:STATe <State>
Activates/deactivates automatic naming of the hardcopy files.
Parameters:
<State> 0 | 1 | OFF | ON
*RST: 1
Example:
HCOP:FILE:AUTO:STAT OFF
Deactivates automatic naming.
Manual operation: See "Automatic Naming" on page 108
:HCOPy:IMAGe:FORMat <Format>
This command selects the bitmap graphic format for the screenshot. You can also
retrieve the data using command HCOP:DATA?.
This command is an alias to command HCOPy:DEVice:LANGuage.
Parameters:
<Format> BMP | JPG | XPM | PNG
*RST: PNG
Example:
HCOP:IMAG:FORM XPM
Selects the image format XPM.
HCOPy Subsystem