Remote Control Commands
R&S
®
SMC100A
285Operating Manual 1411.4060.32 ─ 09
Example:
CORR:DEXC:MODE EXP
selects that the user correction list is exported into an ASCII file.
CORR:DEXC:AFIL:SEL '/var/user/import_ucor.csv'
selects ASCII file ucor.csv as destination for the user correction
list data.
CORR:DEXC:AFIL:SEP:COL TAB
the pairs of frequency and level values are separated by a tabu-
lator.
CORR:DEXC:AFIL:SEP:DEC DOT
selects the decimal separator dot.
CORR:DEXC:SEL '/var/user/import_ucor_imp'
selects that the user correction list ucor_imp is imported into
ASCII file ucor.csv.
Manual operation:
See " Column Separator- User Correction " on page 144
[:SOURce<hw>]:CORRection:DEXChange:AFILe:SEParator:DECimal <Decimal>
Selects the decimal separator used in the ASCII data between '.' (decimal point) and ','
(comma) with floating-point numerals.
Parameters:
<Decimal> DOT | COMMa
*RST: DOT
Example:
CORR:DEXC:MODE EXP
selects that the user correction list is exported into an ASCII file.
CORR:DEXC:AFIL:SEL '/var/user/import_ucor.csv'
selects ASCII file ucor.csv as destination for the user correction
list data.
CORR:DEXC:AFIL:SEP:COL TAB
the pairs of frequency and level values are separated by a tabu-
lator.
CORR:DEXC:AFIL:SEP:DEC DOT
selects the decimal separator dot.
CORR:DEXC:SEL '/var/user/import_ucor_imp'
selects that the user correction list ucor_imp is imported into
ASCII file ucor.csv.
Manual operation:
See " Decimal Point - User Correction " on page 144
[:SOURce<hw>]:CORRection:DEXChange:EXECute
Starts the export or import of the selected file. When import is selected, the ASCII file is
imported as user correction list. When export is selected, the user correction list is
exported into the selected ASCII file.
SOURce Subsystem
To Next Page
Loading...
