Remote Control Commands
R&S
®
SMC100A
286Operating Manual 1411.4060.32 ─ 09
Example:
CORR:DEXC:MODE IMP
selects that ASCII files with frequency and level value pairs are
imported and transferred into user correction lists.
CORR:DEXC:AFIL:SEL '/var/user/import_ucor.csv'
selects that ASCII file ucor.csv is imported.
CORR:DEXC:SEL '/var/user/import_ucor_imp'
selects that the ASCII file ucor.csv is imported into user cor-
rection list ucor_imp.
CORR:DEXC:EXEC
starts the import of the ASCII file data into the user correction
file.
Usage:
Event
Manual operation: See " Import / Export - User Correction " on page 144
[:SOURce<hw>]:CORRection:DEXChange:MODE
<Mode>
Selects if user correction lists should be imported or exported. Depending on the selec-
tion her, the file select command define either the source or the destination for user
correction lists and ASCII files.
Parameters:
<Mode> IMPort | EXPort
*RST: IMPort
Example:
CORR:DEXC:MODE IMP
selects that ASCII files with frequency and level value pairs are
imported and transferred into user correction lists.
CORR:DEXC:AFIL:SEL '/var/user/ucor.csv'
selects that ASCII file ucor.csv is imported.
CORR:DEXC:SEL '/var/user/ucor_imp'
selects that the ASCII file ucor.csv is imported into user cor-
rection list ucor_imp.
Manual operation: See " Mode - User Correction " on page 143
[:SOURce<hw>]:CORRection:DEXChange:SELect <Filename>
Selects the user correction list to be imported or exported.
The user correction files are stored with the fixed file extensions *.uco in a directory
of the user's choice. The directory applicable to the commands is defined with the com-
mand MMEMory:CDIR. A path can also be specified in command
SOUR:CORR:DEXC:SEL, in which case the files are stored or loaded in the specified
directory.
Parameters:
<Filename> string
SOURce Subsystem
To Next Page
Loading...
