SME Analog Modulations
1038.6002.02 2.55 E-13
AM POLARITY
Selection of the polarity of amplitude modulation.
NORM A positive modulation voltage generates a higher output level.
INV The AM polarity is inverted.
IEC-bus command SOUR:AM:POL NORM
LFGEN1 FREQ
Selection of the frequency of the 1st LF generator.
IEC-bus command SOUR:AM:INT1:FREQ 1kHz
LFGEN2 FREQ
Input value of the frequency of the 2nd LF generator.
IEC-bus command SOUR:AM:INT2:FREQ 1kHz
LFGEN2 SHAPE
Selection of the waveform of the 2nd LF generator.
IEC-bus command :SOUR2:FUNC SIN
To Next Page
Loading...
