SME Utilities
1038.6002.02 2.165 E-13
2.11.13 Assigning Modulations to the [MOD ON/OFF] Key (MOD-KEY)
The modulations can be switched on/off in the individual modulation menus and parallely by means of
the [MOD ON/OFF] key.
For which modulations the [MOD ON/OFF] key is effective can be defined in the UTILITIES-MOD KEY
menu. The key can either be effective for all modulations or for a selected one.
Function of the [MOD ON/OFF] key if effective for a type of modulation:
À Every pressing a key alters the state (ON or OFF) of the selected modulation.
Function of the [MOD ON/OFF] key if effective for all types of modulation (ALL):
À If at least one modulation is switched on, pressing the [MOD ON/OFF] key switches the modulation/s
off. Which modulations were switched on is stored.
If no modulation is switched on, pressing the [MOD ON/OFF] key switches on the modulations which
were last switched off using the [MOD ON/OFF] key.
On switching on using the [MOD ON/OFF] key, the modulation sources are used as defined in the
modulation menus.
Access to the selection of the modulation to be switched using the [MOD ON/OFF] key is possible in the
UTILITIES-MOD KEY menu.
Menu selection: UTILITIES - MOD KEY
FREQUENCY
LEVEL
MODULATION
DIGITAL MOD
LF OUTPUT
SWEEP
LIST
MEM SEQ
UTILITIES
HELP
SYSTEM
REF OSC
PHASE
PROTECT
CALIB
DIAG
TEST
MOD KEY
AUX I/O
BEEPER
INSTALL
MODULATION
ALL AM FM PM PULSE DM
FREQ
100. 000 000 0
MHz
LEVEL
-30.0
dBm
Fig. 2-76 Menu UTILITIES - MOD KEY (preset setting)
MODULATION
Selection for which modulation the [MOD ON/OFF] key is to be effective.
Note: Preset switches off all modulations, sets the selection to ALL and
stores AM 30%, AM SOURCE INT: LF GEN1 as default setting.
To Next Page
Loading...
