SME SOURce:CORRection
1038.6002.02 3.33 E-133
[:SOURce]:CORRection:CSET:DATA
The commands to edit the UCOR tables are under this node.
[:SOURce]:CORRection:CSET:DATA:FREQuency 5 kHz to 1.5 GHz {,5 kHz to 1.5 GHz}
SME03E/03/06: to 2.2/3/6 GHz
The command transmits the frequency data for the table selected using
:SOURce:CORRection:CSET. *RST does not influence data lists.
Example: :SOUR:CORR:CSET:DATA:FREQ 100MHz,102MHz,103MHz,to
[:SOURce]:CORRection:CSET:DATA:POWer -40dB to 6dB {,-40dB to 6dB}
The command transmits the level data for the table selected using
:SOURce:CORRection:CSET. *RST does not influence data lists.
Example: :SOUR:CORR:CSET:DATA:POWer 1dB, 0.8dB, 0.75dB,to
[:SOURce]:CORRection:CSET:DELete "Name of table"
The command deletes the table indicated from the instrument memory. This command triggers an
event and hence has no *RST value.
Example: :SOUR:CORR:CSET:DEL "UCOR2"
To Next Page
Loading...
