Rohde & Schwarz SME02 - Page 324

SOURce:VOR SME
1038.6002.02 3.108 E-13
[:SOURce]:VOR:REFerence[:DEViation] 0 to 960 Hz
The command sets the frequency deviation of the reference signal on the FM carrier.
Example: :SOUR:VOR:REF:DEV 480 *RST value is 480 Hz
[:SOURce]:VOR:PRESet
The command sets the frequency deviation of the reference signal on the FM carrier.
:VOR:MODE NORM
:VOR:SOUR INT2
:VOR 0deg
:VOR:DIRection FROM
:VOR:VAR:FREQ 30Hz
:VOR:VAR 30PCT
:VOR:SUBC 9960Hz
:VOR:SUBC:DEPTh 30PCT
:VOR:REF:DEV 480Hz
:VOR:COM OFF
:VOR:COM:FREQ 1020Hz
:VOR:COM:DEPTh 10PCT
The values set correspond to the state after SYSTEM:PRESET or *RST. The command neither
has a query form nor an *RST value.
Example: :SOUR:VOR:PRES
[:SOURce]:VOR:COMid[:STATe] ON | OFF
The command activates or deactivates the ComId signal. *RST value is OFF
Example: :SOUR:VOR:COM:STAT ON
[:SOURce]:VOR:COMid:FREQuency 0.1 to 20 000 Hz
The command sets the frequency of the ComId signal. *RST value is 1020 Hz
Example: :SOUR:VOR:COM:FREQ 1020
[:SOURce]:VOR:COMid:DEPTh 0 to 100 PCT
The command sets the AM modulation depth of the ComId signal.
Example: :SOUR:VOR:COM:DEPT 10PCT *RST value is 10 PCT