SME SYSTem
1038.6002.02 3.117 E-13
3.6.14 SYSTem-System
In this system, a number of commands for general functions which are not immediately related to signal
generation, are combined.
Command Parameter Default
Unit
Remark
:SYSTem
:BEEPer
:STATe
:COMMunicate
:GPIB
[:SELF]
:ADDRess
:SERial
:CONTrol
:RTS
:BAUD
:PACE
:ERRor?
:KLOCk
:MODE
:MSEQuence
:CATalog?
:DELete
:ALL
:DWELl
:FREE?
:MODE
[:RCL]
:POINts?
:SELect
:PRESet
:PROTect
[:STATe]
:SECurity
[:STATe]
:SERRor?
:VERSion?
ON | OFF
0 to 30
ON | IBFull | RFR
1200 | 2400 | 4800 | 9600 | 19200 | 38400 | 57600 |
115200
XON | NONE
ON | OFF
FIXed | MSEQuence
"Name of sequence"
50 ms to 60 s {,50 ms to 60 s}
AUTO | STEP
1 to 50 {,1 to 50}
"Name of sequence"
ON | OFF , password
ON | OFF
s
Query only
Query only
Query only
No query
Query only
Query only
:SYSTem:BEEPer:STATe ON | OFF
This node contains the commands to set the beeper fitted. *RST value is OFF
Example: :SYST:BEEP:STAT OFF
:SYSTem:COMMunicate
The commands to set the remote control interfaces are under this node.
To Next Page
Loading...
