Rohde & Schwarz SME02 - Page 339

SME TEST
1038.6002.02 3.123 E-13
:TEST:DIRect:DCOD Subaddress, hex data string
The command acts on module DCOD. (cf. :TEST:DIR:SUM)
:TEST:DIRect:DSYN0MUX Subaddress, hex data string
The command acts on module DSYN. (cf. :TEST:DIR:SUM)
:TEST:DIRect:DSYN1MUX Subaddress, hex data string
The command acts on module DSYN. (cf. :TEST:DIR:SUM)
:TEST:DIRect:FMOD Subaddress, hex data string
The command acts on module FMOD. (cf. :TEST:DIR:SUM)
:TEST:DIRect:LFGENA Subaddress, hex data string
The command acts on module LFGENA. (cf. :TEST:DIR:SUM)
:TEST:DIRect:LFGENB Subaddress, hex data string
The command acts on module LFGENB. (cf. :TEST:DIR:SUM)
:TEST:DIRect:MGEN Subaddress, hex data string
The command acts on module MGEN. (cf. :TEST:DIR:SUM)
:TEST:DIRect:OPU1M Subaddress, hex data string
The command acts on module OPU1. (cf. :TEST:DIR:SUM)
:TEST:DIRect:OPU3M Subaddress, hex data string
The command acts on module OPU3. (cf. :TEST:DIR:SUM)
:TEST:DIRect:OPU6M Subaddress, hex data string
The command acts on module OPU6. (cf. :TEST:DIR:SUM)
:TEST:DIRect:PUM Subaddress, hex data string
The command acts on module PUM. (cf. :TEST:DIR:SUM)
:TEST:DIRect:REFSS Subaddress, hex data string
The command acts on module REFSS. (cf. :TEST:DIR:SUM)
:TEST:DIRect:ROSC Subaddress, hex data string
The command acts on module ROSC. (cf. :TEST:DIR:SUM)
:TEST:RAM?
The command triggers a test of the RAM.
:TEST:ROM?
The command triggers a test of the main memory (EEPROM).
:TEST:BATTery[:RAM]?
The command triggers a test of the RAM battery voltage. The voltage should be at least 2.1 V.
:TEST:BATTery:XMEM?
The command triggers a test of the XMEM battery voltage. The voltage should be at least 2.1 V.