SME Front Panel
1038.6002.02 2.9 E-13
Brightness and contrast of the display can be set using
the rotary knobs.
Contrast
Brightness
See as well
Section 1.1.5,
Setting of Contrast and
Brightness of the
Display
8 QUICK SELECT
ASSGIN
MENU 1 MENU 2
QUICK SELECT
The menu-quick-selection keys permit fast access to
two menus selected.
ASSIGN Stores the current menu as menu1
when the MENU1 key is pressed
afterwards or as menu2 when the
MENU2 key is pressed afterwards.
MENU1 Activates menu1 stored.
MENU2 Activates menu2 stored.
See as well
Section 2.2.2, Basic
Operating Steps
9 Switching On/Off
STBY
ON
The On/Off switch switches the instrument from the
standby mode to the ready-for-operation status.
Prerequisite: The power switch at the rear of the
instrument must be switched on.
STBY LED is illuminated in the standby
mode.
see as well
Section 1.1.3,
Switching On/Off the
Instrument
Section 2.1.2,
Elements of the Rear
Panel, Power Switch
To Next Page
Loading...
