Rohde & Schwarz SME02 - Elements of the Rear Panel

SME Rear Panel
1038.6002.02 2.13 E-13
2.1.2 Elements of the Rear Panel
(Cf. Fig. 2-2, Rear panel view)
10
X-A X I S MARKER BLAN K
Outputs for control and triggering in the sweep and list
operating modes.
X-AXIS Level: 0 to 10 V.
MARKER Level: TTL
BLANK Level: TTL
See as well
Section 2.8,
Sweep
Section 2.9,
LIST Mode
11
LF
LF Cut-out, provided to relocate the LF output
at the front to the rear of the instrument.
12
TR I GGE R
TRIGGER Input to trigger sweep, memory sequence,
LIST mode and DM memory extension.
Level: TTL
See as well
respective section as
to menus and
Section 2.11.14,
Input/Output Settings
(AUX I/O)
13
BURST
DATA
CLOCK
BURST Signal input/output for digital modulation.
Signal output for synchronization with data
signal generated internally. Level TTL.
Signal input in the external operating mode
to control level bursts. Level TTL.
DATA Cut-out, provided to relocate the data
input/output at the front to the rear of the
instrument.
CLOCK Cut-out, provided to relocate the clock
input/output at the front to the rear of the
instrument.
See as well
Section 2.6.3,
Digital Modulation