SME List Editor
1038.6002.02 2.31 E-13
2.2.4.3 Edition of Lists
Due to the selection of an edit mode on the OPERATION page the EDIT page is automatically activated.
When the EDIT/VIEW function is selected, the largest possible section of the list is displayed (cf. Fig.
2-10). In the case of block functions FILL, INSERT and DELETE, an input window is additionally
displayed (cf. Fig. 2-11 to 2-13).
Functions SELECT LIST and FUNCTION are available on the EDIT page as on the OPERATION page.
Return to the OPERATION page is effected by pressing the [SELECT] key twice.
Single-value function EDIT/VIEW
By selecting the EDIT/VIEW function, the entire list can be viewed or modifications of single values be
carried out.
If the cursor marks a value in the INDEX column of the list, the EDIT mode is exited by pressing the
[RETURN] key. The menu cursor then marks FUNCTION again.
There is no separate function for storing the list. This means that every modification of the list is
transferred to the internal data set and has an effect on exiting the EDIT/VIEW function.
Selection: FUNCTION EDIT/VIEW
FREQUENCY
LEVEL
MODULATION
DIGITAL MOD
LF OUTPUT
SWEEP
LIST
MEM SEQ
UTILITIES
HELP
DELETE
FREQ
100. 000 000 0
MHz
LEVEL
-30.0
dBm
INSERTFILL EDIT/VIEW
SELECT LIST... CURRENT: MSEQ2
FUNCTION
-INDEX - FREE 2041 - LEN 2055 MEMORY DWELL
0001
09 50 ms
0002 02 50 ms
0003 01 60 ms
0004 23 60 ms
0005 09 85 ms
0006 10 85 ms
0007 08 85 ms
0008 11 85 ms
Fig. 2-10 Edit function EDIT/VIEW
INDEX
Position in the list
FREE
Space available. FREE 2041 means that space for 2041 parameter elements
is available in the list memory in total.
LEN
Occupied space. LEN 2055 means that the current list occupies 2055
elements in the list memory.
MEMORY DWELL
Identification of the column below. The number of parameter columns is
different for the various list editors. The list editor for digital modulation data
possess three parameter columns (DATA, BURST and LEVEL
ATTENUATION).
To Next Page
Loading...
