List Editor SME
1038.6002.02 2.34 E-13
Block function INSERT
Function INSERT inserts the desired number of elements with constant or linearly
increasing/de-creasing values before the element with the given starting index. All elements which had
been stored from the starting index are shifted to the end of the range to be inserted.
Input is effected analogously to filling a list.
By pressing the [RETURN] key the input window is exited without a modification being effected. The
menu cursor then marks FUNCTION.
The list entry, in the example for MEMORY, with index [AT +n] is calculated as follows from the
information AT, RANGE, starting value (MEMORY) and WITH INCREMENT:
MEMORY[AT+n] = starting value (MEMORY) + n · Increment | (0
≤
n
≤
RANGE-1)
Selection: FUNCTION INSERT
FREQUENCY
LEVEL
MODULATION
DIGITAL MOD
LF OUTPUT
SWEEP
LIST
MEM SEQ
UTILITIES
HELP
FREQ
100. 000 000 0
MHz
LEVEL
- 30.0
dBm
SELECT LIST...
FUNCTION
-INDEX - FREE 2041 - LEN 2055
0001
0002
0003
0004
0005
0006
0007
0008
INSERT AT
10 RANGE 2
MEMORY 1
WITH INCREMENT 0
DWELL 100ms
WITH INCREMENT 0.0ms
EXECUTE
Fig. 2-12 Edit function INSERT: Input window
INSERT AT
Input of the starting index and the number of the elements to be inserted.
AT Starting index before which the insert operation is to be effective.
RANGE Number of the elements to be inserted
MEMORY
Input of the starting value for MEMORY.
DWELL
Input of the starting value for DWELL.
WITH INCREMENT
Input of the increment between two successive values for MEMORY or
DWELL. If 0 is indicated as increment, constant values are achieved to be
inserted RANGE times.
Note: In the case of some types of lists, e.g. digital modulation data, indicating
an increment is eliminated since there are binary data. In these cases
all lines WITH INCREMENT are eliminated.
EXECUTE Ð
Starts the inserting sequence. After the function has been executed, the input
window is automatically exited. The menu cursor marks FUNCTION. The EDIT
page shows the beginning of the range that has moved forward.
To Next Page
Loading...
