Rohde & Schwarz SME02 - Page 83

SME List Editor
1038.6002.02 2.37 E-13
.
EDIT/VIEW
.
MENU / VARIATION
SELECT
MENU / VARIATION Select single-value function
EDIT/VIEW.
The EDIT page of the MEM SEQ
menu is called. The menu cursor
marks the index of the first element
of list MSEQ0.
SELECT
Set the menu cursor to the memory
location number value of the first
element (c.f. Fig. 2-15,A).
DATA INPUT
2
0
1x
ENTER
Enter MEMORY 20.
The menu cursor automatically wraps
to the DWELL value of the first
element (Fig. 2-15,B). The default
value is 100 ms.
DATA INPUT
1
5
1x
ENTER
Enter DWELL 15 s.
The menu cursor automatically wraps
to the MEMORY value of the second
element.
DATA INPUT
1
1x
ENTER
Enter MEMORY 1.
The menu cursor automatically wraps
to the DWELL value of the second
element (default value is 100 ms).
RETURN
Reset the menu cursor to the index.
RETURN
Reset the menu cursor to the
FUNCTION menu item of the EDIT
page of menu MEM SEQ (c.f. Fig. 2-
15,C).
RETURN
Reset the menu cursor to the
FUNCTION menu item of the
OPERATION page of menu MEM
SEQ.
Note: With the return to the OPERATION page the operation of the list editor is finished. In the list
mode (menu LIST), function LEARN
➤ must be activated subsequently to ensure that the
settings are transferred to the hardware.