Digital Standard W-CDMA (NTT DoCoMo/ARIB 0.0) SMIQ
1125.5555.03 E-92.164
DATA...
Opens a window for selecting data sources and setting a data offset. The first
line of the window indicates the code channel for which the settings are done
(DATA CONFIGURATION OF CHANNEL NO).
DATA
Selection of the data source for the DATA field of the
selected channel type. The data from the selected
data source are permanently continued from slot to
slot in the data field.
PN.. PRBS data to CCITT with period lengths
between 29-1 and 216-1.
DLIST Data from a list previously programmed
and stored. Programming is performed in
the menu
DIGITAL MOD - SOURCE - EDIT DATA LIST
IEC/IEEE-bus :SOUR:WCDM:CHAN4:DATA PN9
DATA OFFSET
Entry value for a data offset in units of symbol
duration. The admissible range is as large as the
length of a radio frame. The entry of a data offset
shifts in time the modulation data with respect to the
spread code.
IEC/IEEE-bus :SOUR:WCDM:CHAN4:DATA:OFFS 3
TPC
Selection of the data source for the TPC field in
channel types DPCH and DPCCh.
0 0 data are continuously generated
1 1 data are continuously generated
ALT The TPC field is alternately assigned with
1 or 0 from slot to slot.
(The first slot contains 1 data).
DLIST Data from a list previously programmed
and stored. Programming is performed in
the menu DIGITAL MOD - SOURCE -
EDIT DATA LIST
IEC/IEEE-bus :SOUR:WCDM:CHAN4:TPC ZERO
STATE
Switch on/off of assigned code channel.
IEC/IEEE-bus command :SOUR:WCDM:CHAN4:STAT ON
To Next Page
Loading...
