Rohde & Schwarz SMIQ02B - Table 2-26 Default Values for Mobile Station Parameters

Digital Standard 3GPP W-CDMA (FDD) SMIQ
1125.5555.03 E-92.218
Default settings for UP/REVERSE link
Mobile station parameters
Table 2-26 Default values for mobile station parameters
Parameters MS1 MS2 MS3 MS4
STATE OFF OFF OFF OFF
MODE DPCCH + DPDCH DPCCH + DPDCH DPCCH + DPDCH DPCCH + DPDCH
SCRAMBLING CODE 0 0 0 0
SC MODE LONG LONG LONG LONG
TPC READ OUT MODE CONTINUOUS CONTINUOUS CONTINUOUS CONTINUOUS
TPC All 0 All 0 All 0 All 0
Parameter PRACH only mode:
PREAMBLE REPETITION 1
PREAMBLE POWER 0 dB
DATA PART POWER 0 dB
CONTROL PART POWER 0 dB
Message Part Length 1
SIGNATURE 0
ACCESS SLOT 0
SYMBOL RATE 30 ksps
DATA PN15
DATA PATTERN "0000 0000 0000 0000"
TFCI 0
Parameter PCPCH only mode:
PREAMBLE REPETITION 1
PREAMBLE POWER 0 dB
PREAMBLE POWER STEP 0 dB
DATA PART POWER 0 dB
CONTROL PART POWER 0 dB
MESSAGE PART LENGTH 1
Power CONTROL
PREAMBLE LENGTH 0 slots
SIGNATURE 0
ACCESS SLOT 0
FBI MODE OFF
FBI ALL 0
FBI PATTERN "0000 0000 0000 0000"
SYMBOL RATE 30 ksps
DATA PN15
DATA PATTERN "0000 0000 0000 0000"
TFCI 0