Rohde & Schwarz SMIQ02B - LF Sweep

SMIQ Sweep
1125.5555.03 2.399 E-9
RESET SWEEP
Sets the starting level.
IEC/IEEE-bus command
:ABOR
MARKER 1 LEVEL
MARKER 2 LEVEL
MARKER 3 LEVEL
MARKER 4 LEVEL
Input value of the level for the marker selected.
IEC/IEEE-bus command
:SOUR:MARK1:PSW:POW 0dBm
MARKER 1 STATE
MARKER 2 STATE
MARKER 3 STATE
MARKER 4 STATE
Switching on/off the marker selected.
IEC/IEEE-bus command
:SOUR:MARK1:PSW OFF
2.26.8 LF Sweep
Menu SWEEP - LF GEN offers access to settings for LF sweep.
Menu selection: SWEEP - LF GEN
Fig. 2-248 Menu SWEEP - LF GEN