SMIQ Front Panel
1125.5555.03 2.11 E-7
7
Brightness and contrast of the display can be set using
the rotary knobs.
Contrast
Brightness
See as well
Chapter 1
Section "Setting of
Contrast and Bright-
ness of the Display"
8 QUICK SELECT
ASSIGN MENU1 MENU2
QUICK SELECT
The menu-quick-selection keys permit fast access to
two menus selected.
ASSIGN Stores the current menu as menu1
when the MENU1 key is pressed
afterwards or as menu2 when the
MENU2 key is pressed afterwards.
MENU1 Activates menu1 stored.
MENU2 Activates menu2 stored.
See as well
Chapter 2
Section
"Basic Operating
Steps"
9 Switching On/Off
STBY
ON
The On/Off switch switches the instrument from the
standby mode to the ready-for-operation status.
Prerequisite: The power switch at the rear of the
instrument must be switched on.
STBY LED is illuminated in the standby
mode.
see as well
Chapter 1
Section "Switching
On/Off the Instrument"
Chapter 2
Section "Elements of
the Rear Panel, Power
Switch"
To Next Page
Loading...
