Stereo Modulation (Option R&S SML-B5) R&S®SML / R&S®SMV03
1090.3123.12 E-6 4.26
EON-AFA
Des
cription: Enhanced Other Networks:
defines type A alternative frequencies for the EON with PI=yyyy.
Command: EON-AFA= yyyy,A,xxx.x,xxx.x,...
Query: EON-AFA,yyyy,z?
Response: xxx.x,xxx.x,...
or () if list "z" is not available
Value range: xxx.x = 87.6 to 107.9 (ASCII coded decimal numbers)
yyyy = 0000 to FFFF (ASCII coded hexadecimal numbers)
A = N“ (new AF list) or "+" (AF list to be added)
z = 1-5 1 to 5 (AF list to be read)
Example: Command:
STEReo:DIRect “EON-AFA=1000,N,97.4,98.3“
Creates a new type A alternative frequency list for the EON with PI=1000.
The new list contains the alternative frequencies 97.4 MHz and 98.3 MHz.
Query:
STEReo:DIRect? “EON-AFA,1000,1“
Reads the first type A alternative frequency list of the EON with PI=1000.
Response:
"97.4,98.3"
Note: For each Enhanced Other Network (EON), a maximum of five type A alternative frequency
lists can be created.
EON-AFB
Description: Enhanced Other Networks:
defines type B alternative frequencies for the EON with PI=yyyy.
Command: EON-AFB= yyyy,A,xxx.x,xxx.x,...
1. Freq = Tuned Frequenz (TF)
2. bis 5. Freq = Mapped Frequenz (MF)
Query: EON-AFB,yyyy,z?
Response: xxx.x,xxx.x,...
or () if list "z" is not available ist
Value range: xxx.x = 87.6 to 107.9 (ASCII coded decimal numbers)
yyyy = 0000 to FFFF (ASCII coded hexadecimal numbers)
A = "N" (new AF list) or "+" (AF list to be added)
z = 1 to 5 (AF list to be read)
Example: Command:
STEReo:DIRect “EON-AFB=1000,N,97.4,98.3“
Creates a new type B alternative frequency list for the EON with PI=1000.
The list contains the alternative frequencies 97.4 MHz and 98.3 MHz.
Query:
STEReo:DIRect? “EON-AFB,1000,1“
Reads the first type B alternative frequency list of the EON with PI=1000.
Response:
"97.4,98.3"
Note: For each Enhanced Other Network (EON), a maximum of five type B alternative frequency
lists can be created, each list containing max. five frequencies. A minimum of two
frequencies per EON is required.