Contents SMR
1104.3430.12 8 E-1
Tables
Table 4-1 Input connectors for external modulation .....................................................................4.10
Table 4-2 Status messages for deviation from nominal at external modulation inputs................4.11
Table 4-3 Modulation types which cannot be active simultaneously ............................................4.12
Table 4-4 List mode, typical list ....................................................................................................4.34
Table 4-5 Memory sequence; example of list...............................................................................4.38
Table 5-1 Synchronization by means of *OPC, *OPC? and *WAI................................................5.15
Table 5-2 Meaning of the bits used in the status byte..................................................................5.19
Table 5-3 Meaning of the bits used in the event status register...................................................5.20
Table 5-4 Resetting of instrument functions.................................................................................5.24
Table 5-5 Interface functions........................................................................................................5.26
Table 5-6 Universal commands....................................................................................................5.27
Table 5-7 Addressed commands .................................................................................................5.27
Table 5-8 Control characters for RS-232-C interface...................................................................5.29
Table 6-1 Common Commands .....................................................................................................6.3
Table 6-2 Device Response to *OPT? ...........................................................................................6.4
To Next Page
Loading...
