User Documentation R&S SMA
1104.3430.62 0.2 E-1
Documentation CD-ROM
The CD-ROM provides the complete user documentation for the
Signal Generator:
- The complete operating manual and service manual in printable
form (*.pdf).
- The data sheet (brochure and specifications) in printable form.
Links to different useful sites in the R&S internet.
Optional Documentation
Operating Manual
The operating manual contains comprehensive information about
the instrument functions and remote control, in addition to the
chapters of the quick start guide. It includes information about
maintenance of the instrument and about error detection listing the
error messages which may be output by the instrument. It is sub-
divided into 10 chapters:
Chapter 1 describes the control elements and connectors on
the front and rear panel as well as all procedures
required for putting the instrument into operation.
Chapter 2 gives an introduction to the operating concept and
typical applications of the R&S SMR.
Chapter 3 describes key operating modes, the structure of the
graphical interface and the principles of manual
control.
Chapter 4 forms a reference for manual control of the
R&S SMR and contains a detailed description of all
instrument functions and their application. The
chapter also lists the remote control command cor-
responding to each instrument function.
Kapitel 5 describes the basics for programming the
R&S SMR, command processing and the status
reporting system.
Chapter 6 lists all the remote-control commands defined for
the instrument.
Chapter 7 contains program examples for a number of
typical applications of the R&S SMR.
Chapter 8 describes preventive maintenance and the charac-
teristics of the instrument’s interfaces.
Chapter 9 gives the status messages and a list of error mes-
sages that the R&S SMR may generate.
Chapter 10 contains an index for the operating manual.
To Next Page
Loading...
