EXT1 Input external modulation signal alternatively for
AM, FM, ASK and FSK.
EXT2 Input external modulation signal alternatively for
AM and FM.
PULSE Input for triggering the pulse generator or for
direct control of the pulse modulation.
2 DISPLAY
Cf. Chapter 3 for the design of the display.
3
Parameter field
Parameters RF frequency and RF level can be entered
directly by means of the parameter keys, alternatively to
menu operation. Further, complete instrument settings can
be stored and called.
FREQ Opens the setting of the RF frequency via value
input or variation by means of a rotary knob. The
current menu is maintained. Return to the menu
by means of the [BACK] key. (Setting of the RF
frequency also in the FREQUENCY menu).
LEVEL Opens the setting of the RF level via value input
or variation by means of a rotary knob. The
current menu is maintained. Return to the menu
by means of the [BACK] key. (Setting of the RF
level also in the LEVEL menu).
SAVE Opens the storing of the current instrument
setting. Memory selection is effected by entering a
number (1 to 50) and is finished by means of the
[x1/ENTER] key.
RCL Opens the calling of an instrument setting stored.
Memory selection is effected by entering a
number (1 to 50) and is finished by means of the
[x1/ENTER] key.
Cf. Chapter 3, Sections "Use of [FREQ] and
[LEVEL] Keys", "RF Frequency", "RF Level" and
"Storing and Calling of Instrument Settings".
Fig. 1-1 Front panel view
To Next Page
Loading...
