Rohde & Schwarz SMR20 - Page 42

Sample Setting for First Users R&S SMR
1134.9108.12 E-1 2.2
AM modulation of the output signal
The output signal is to be amplitude-modulated next.
- AM modulation depth 30 %
- AM signal 1-kHz sine
Operating steps Explanations
.
Modulation
.
MENU / VARIATION
SELECT
MENU / VARIATION
Select menu Modulation using rotary
knob.
Press [SELECT] key or rotary knob.
The submenu is displayed.
.
AM
.
MENU / VARIATION
SELECT
MENU / VARIATION
Select submenu AM.
Press [SELECT] key or rotary knob.
The AM setting menu is displayed.
.
AM Depth
.
MENU / VARIATION
SELECT
MENU / VARIATION
Select parameter AM Depth using
rotary knob.
Press [SELECT] key or rotary knob.
The menu cursor marks the setting
value.
DATA INPUT
x1
ENTER
30
0
.
Enter modulation depth 30 % and
acknowledge using [x1/Enter] key.
BACK
Reset menu cursor to AM Depth
using [BACK] key.
.
AM Source
.
MENU / VARIATION
SELECT
MENU / VARIATION
Select AM Source using rotary knob.
Press [SELECT] key or rotary knob.
A pop-up menu displays the current
1-out-of-n selection.