Rohde & Schwarz SMR20 - Page 43

R&S SMR Sample Setting for First Users
1134.9108.62 E-1 2.3
Operating steps Explanations
.
LFGen
.
MENU / VARIATION
SELECT
MENU / VARIATION
Select LF generator as modulation
source using rotary knob.
The selection mark marks LFGen.
Press [SELECT] key or rotary knob.
The cursor is set back to AM Source.
BACK
Press [BACK] key.
.
LFGen Freq
.
MENU / VARIATION
SELECT
MENU / VARIATION
Select parameter LFGen Freq using
rotary knob.
Press [SELECT] key or rotary knob.
The menu cursor marks the current
frequency selection.
.
1k
.
MENU / VARIATION
SELECT
MENU / VARIATION
Set the frequency of the LF generator
to 1 kHz.
The selection mark marks 1 kHz.
Press [SELECT] key or rotary knob.
The AM modulation setting is
completed.
The indications on the display are
represented in Fig. 2-1.
Fig. 2-1 Display for AM setting